03 50 00 Cast Decks & Underlayment
Ardex K 15 55 lb bag
$56.33The most widely specified and used Portland cement based self-leveling underlayment. Use Ardex primers P-51 on concrete or P-82 on non-porous subfloors. Advantages: Install 1/8”- 1-1/2” neat, add pea gravel over 5", walkable after 3 hrs, install floor in 16 hrs. Limitations: Should not be used in areas of constant water exposure, do not install when surface temperatures are below 50ºF, not intended as a wear surface.
Learn MoreBASF MasterTop 110 SL 50 lb bag
$31.16Self-Leveling Cementitious Floor Underlayment
An economical, self-leveling, poured-in-place cementitious, non-structural floor underlayment intended for use over pre-cast and cast-in-place concrete floors. Contains fast-setting Portland cement and fine aggregate.
Learn MoreArdex 7.0 Quart Mixing Bucket - Use with K-15
$14.08Pre-measured for precise water control necessary for the successful installation of product, 7.00 quart for use with Ardex K-15. Learn MoreArdex T-1 Mixing Paddle
$39.69Egg shape contoured to the inside of the barrel for fast and thorough mixing​. Learn MoreArdex T-1 Mixing Paddle Extended Shaft
$42.53Contoured to the inside of the barrel for fast and thorough mixing with extended shaft​. Learn MoreArdex T-10 Mixing Drum
$106.58Black mixing barrel for easy mixing of two bag batches, includes lid for storage, with lid. Learn MoreArdex Mixing Bucket 5.50 Quart for K-500
$13.93Pre-measured 5.50 quart bucket for precise water control necessary for the successful installation of Ardex K-500.
Learn MoreArdex K 500 Self-Leveling Concrete Topping 55lb Bag
$64.74Self-Leveling Concrete Topping/Polishable Overlay
Ardex K 500 is a self-leveling, no troweling topping for fast track resurfacing, smoothing or leveling of indoor concrete. Ardex K 500 can be installed from 1/4” to 1-1/2” thick in one operation and up to 5” with the addition of appropriate aggregate.
Learn MoreLyons Manufacturing Super Flowcrete Gray 45 lb bag
$43.97An interior self-levelling product with a wide variety of applications. It can be used as an underlayment or a wearing surface, has a high abrasion resistance and can be used in warehouse or light manufacturing environments with hard rubber tire forklift traffic. Accepts integral color or stain, can also be used as a decorative topping. Has a compressive strength exceeding 6000 PSI, may be applied from featheredge to 2 inches in one application. No curing or troweling is required, may be used over cutback and is pumpable. Learn More
