(877) 946-6668

Contact Us  About Us  Locations
 

(0 Items)

You have no items in your shopping cart.

Cast Underlayment

Cast Underlayment
 

Items 1 to 10 of 14 total

  1. Ardex K-15 55 lb bag

    Ardex K 15 55 lb bag

    $56.33

    The most widely specified and used Portland cement based self-leveling underlayment. Use Ardex primers P-51 on concrete or P-82 on non-porous subfloors. Advantages: Install 1/8”- 1-1/2” neat, add pea gravel over 5", walkable after 3 hrs, install floor in 16 hrs. Limitations: Should not be used in areas of constant water exposure, do not install when surface temperatures are below 50ºF, not intended as a wear surface.

    Learn More
  2. Lyons Manufacturing Flowcrete SLU Gray 50 lb bag

    Lyons Manufacturing Flowcrete SLU Gray 50 lb bag

    $36.86

    An economical easy to use self-leveling underlayment designed for interior applications. It can be applied over various substrates including concrete and ceramic tile. It may be applied from featheredge to 3 inches in one application. Allows rapid installation of flooring, in some cases as soon as 3 hours. Utilizes P-100 Primer as its surface bonder, contains post-industrial recycled materials.

    Learn More
  3. BASF Master Builders MasterTop 110 SL 50 lb bag

    BASF MasterTop 110 SL 50 lb bag

    $31.16

    Self-Leveling Cementitious Floor Underlayment

    An economical, self-leveling, poured-in-place cementitious, non-structural floor underlayment intended for use over pre-cast and cast-in-place concrete floors. Contains fast-setting Portland cement and fine aggregate.

    Learn More
  4. Ardex MC Plus Moisture Control System - Green 13.2 lb unit

    Ardex MC Plus Moisture Control System - Green 13.2 lb unit

    $172.39

    Sealer - Two-Coat Moisture Control System for Concrete Receiving Ardex Underlayments

    Moisture Control System for concrete to receive Ardex engineered cements. Solvent-free, alkali resistant, low viscosity, two-coat epoxy resin. Use prior to installation of Ardex engineered cements over new or existing concrete that has moisture levels in excess of the maximum permitted by the manufacturer of the finished floor covering or coating. Reduces moisture from up to 20lbs to less than 3lbs overnight. MC Plus is an interior two-coat epoxy resin system that does not require a sand broadcast for underlayment applications under a 1/4” thick. MC Rapid is an interior one-coat epoxy resin system that can be ready to prime in just 4 hours.

    Learn More
  5. Ardex MC Plus Moisture Control System - Red 13.2 lb unit

    Ardex MC Plus Moisture Control System - Red 13.2 lb unit

    $174.04

    Primer - Two-Coat Moisture Control System for Concrete Receiving Ardex Underlayments

    Moisture Control System for concrete to receive Ardex engineered cements. Solvent-free, alkali resistant, low viscosity, two-coat epoxy resin. Use prior to installation of Ardex engineered cements over new or existing concrete that has moisture levels in excess of the maximum permitted by the manufacturer of the finished floor covering or coating. Reduces moisture from up to 20lbs to less than 3lbs overnight. MC Plus is an interior two-coat epoxy resin system that does not require a sand broadcast for underlayment applications under a 1/4” thick. MC Rapid is an interior one-coat epoxy resin system that can be ready to prime in just 4 hours.

    Learn More
  6. Ardex MC Rapid Moisture Control System 22 lb unit

    Ardex MC Rapid Moisture Control System 22 lb unit

    $339.86

    One-Coat Moisture Control System for Concrete Receiving Ardex Underlayments

    The Ardex MC Rapid Moisture Control System is a one-coat, 100% solids epoxy moisture management system formulated to suppress excessive moisture vapor emissions in new or existing concrete prior to installing an Ardex underlayment with flooring.

    * Hazardous Item, Cannot Ship UPS

    Learn More
  7. Ardex E 25 Resilient Emulsion 1 gallon

    E 25 Resilient Emulsion 1 gallon

    $58.82
    Use with Ardex K-15 when applying over wood substrates, add 1/2 gallon of E-25 per bag of Ardex K-15. Learn More
  8. Ardex P-82 Primer 1 gallon

    Ardex P 82 Primer 1 gallon

    $80.57

    A high-strength, solvent-free primer that improves the adhesion of Ardex products over smooth, non-absorbent substrates such as ceramic and other stone tiles, terrazzo, epoxy and metal decking. Also used over wooden subfloors, including plywood and strip wood, as well as over cutback and other non-watersoluble adhesive residues

    Learn More
  9. P-51 Primer 1 gallon

    Ardex P 51 Primer 1 gallon

    $60.87

    Ardex primer is a solvent-free primer for the installation of Ardex underlayments and toppings over absorbent concrete.

    Learn More
  10. Ardex Feather Finish Gray 10 lb bag

    Ardex Feather Finish Gray 10 lb bag

    $21.48
    Smooths flooring substrates permanently prior to the installation of today’s demanding floor coverings such as sheet vinyl and VCT. Mixes with water only and spreads easily. Engineered around a self-drying Portland cement matrix, all of the mix water is chemically combined, no primer required. Advantages: Install finish flooring in 15-20 minutes, minimal waste, can be installed from featheredge up to 1/2". Limitations: For interior use only, water soluble adhesive residue must be removed. Learn More
 

Items 1 to 10 of 14 total