(877) 946-6668

Contact Us  About Us  Locations
 

(0 Items)

You have no items in your shopping cart.
Shop By

Currently Shopping by

  1. Concrete Repair - Application Thickness: Remove This Item 1/4"

Division 03 Concrete

 

Items 1 to 10 of 25 total

  1. Sikacem 103 55 lb bag

    Sikacem 103 55 lb bag

    $35.16

    Machine-Applied, Silica Fume Enhanced, Cementitious Mortar

    A ready-to-use, non-accelerated, cementitious, silica fume enhanced mortar with a dust control agent. Formulated for machine application using dry process shotcrete equipment. Low water cement ratio, very low shrinkage, high density(137 lbs./cu. ft), formulated to minimize dust formation.

    Learn More
  2. Euclid Chemical Verticoat

    Euclid Chemical Verticoat 54 lb bag and 1 gallon liquid

    $45.60

    Two-Component, Trowel Grade Vertical/Overhead Concrete Repair Mortar

    A 2-component, trowel applied, polymer modified cementitious mortar for vertical and overhead concrete and masonry repairs.

    Learn More
  3. Euclid Versaspeed LS 100 50Lb Bag

    Euclid Versaspeed LS 100 50Lb Bag

    $18.33

    Rapid-Hardening Horizontal Repair Mortar with Extended Working Time

    Versaspeed LS100 is a versatile, single-component, rapid-hardening repair mortar for projects that require traffic or a non-breathable coating within hours. Repaired areas may be open to standard tire traffic 3 hours following the final set and an epoxy coating can be applied after 5 hours.

    Learn More
  4. Euclid Chemical Versaspeed 50lb Pail

    Euclid Chemical Versaspeed 50lb Pail

    $34.03

    Rapid-Setting Horizontal Repair Mortar

    One part, patching and repair compound for horizontal, and vertical/overhead form and pour applications. Low shrinkage, high early strength material.

    Learn More
  5. SikaTop 123 Plus

    Sika SikaTop 123 Plus 0.4 cubic foot unit

    $54.35

    Two-Component, Vertical and Overhead, Non-Sag Mortar with Corrosion Inhibitor

    SikaTop 123 Plus is a two-component, polymer-modified, Portland cement-based, fast-setting, non-sag mortar. It is a high performance repair mortar for vertical and overhead surfaces and offers the additional benefit of Sika FerroGard 901, a penetrating corrosion inhibitor included in its formulation.

    Learn More
  6. Sika SikaRepair SHB 50 lb bag

    SikaRepair SHB 50 lb bag

    $45.08

    Non-Sag, High Build Mortar that may be Hand or Wet-Sprayed

    SikaRepair SHB is a one-component, cementitious ready to use repair mortar. It is a multi-purpose mortar which can be applied by trowel or low pressure wet spray process. The incorporation of low density aggregates allows high build applications on vertical and overhead surfaces. SikaLatex R or SikaLatex may be used instead of water for a two component, polymer-modified repair mortar.

    Learn More
  7. Euclid Chemical Versaspeed LS

    Euclid Chemical Versaspeed LS 50 lb bag

    $25.74

    Quick-Setting Horizontal Repair Mortar

    One part, patching and repair compound for horizontal, and vertical/overhead form and pour applications. Low shrinkage, high early strength material. 

    Learn More
  8. Lyons Manufacturing Patchcrete Unit

    Lyons Manufacturing Patchcrete Unit

    $38.00

    Concrete Repair, Topping, and Underlayment

    A 2-component, polymer modified concrete repair material for horizontal, vertical, and overhead surfaces.

    Learn More
  9. Ardex TWP Tilt Wall Patch

    Ardex TWP Tilt Wall Patch

    $31.63

    Wall Patch and Finishing Compound for Vertical Concrete

    A trowelable Portland cement-based finishing compound used to fill and smooth interior and exterior vertical concrete surfaces such as tilt-up walls, pre-cast or poured in place concrete panels, and other concrete or masonry surfaces prior to sealing or painting.

    Learn More
  10. BASF Master Builders MasterEmaco T 430 55 lb bag

    BASF MasterEmaco T 430 55 lb bag

    $25.82

    Rapid-Strength Repair Mortar with Extended Working Time

    A 1-component rapid strength mortar with extended working time for hot weather conditions. Vertical and overhead applications require forming. Wet cure for one day and then apply a curing compound. Will accept an epoxy coating within 6 hrs. High early strength, 1,000 psi in 3 hrs.

    (Formerly Emaco T-430)

    Learn More
 

Items 1 to 10 of 25 total