(877) 946-6668

Contact Us  About Us  Locations
 

(0 Items)

You have no items in your shopping cart.
Shop By

Currently Shopping by

  1. Manufacturer: Remove This Item BASF

Division 03 Concrete

 

Items 1 to 10 of 33 total

  1. BASF Master Builders MasterEmaco T 310 CI 55 lb bag

    BASF MasterEmaco T 310 CI 55 lb bag

    $42.54

    Flowable Horizontal Repair Mortar with Integral Corrosion Inhibitor

    A 1-component, fast setting, polymer-modified, cement-based mortar with a corrosion inhibitor. For horizontal repairs, square cut edges to a minimum 1/4" depth.  It is used for patching or resurfacing distressed horizontal concrete surfaces. It is used for patching or resurfacing distressed horizontal concrete surfaces.

    (Formerly Emaco R310 CI)

    Learn More
  2. BASF Master Builders MasterTop 200 55 lb bag

    BASF MasterTop 200 - Neutral 55 lb bag

    $49.83

    Dry shake, metallic aggregate surface hardener and flatness enhancer for flat or superflat floors. Specifically developed for application on floors that are designed to conform to a specific flatness designation. Up to 1.5 lbs/ft2 can be spread in one pass. Four times greater abrasion resistance than mineral aggregate hardeners and eight times that of standard concrete. Use at a rate of 1.0-3.0 lbs/sf.

    (Formerly known as Masterplate FF)

    Learn More
  3. BASF MasterEmaco A 660 quart

    BASF MasterEmaco A 660 quart

    $15.72

    A 1-component, water-based, acrylic polymer emulsion, used as an internal admixture for Portland cement based mortars, stuccos & concrete mixes. Significantly improves tensile & flexural strengths.

    (Formerly Thoro Acryl 60)

    Learn More
  4. masteremacos440small

    BASF MasterEmaco S 440 55 lb bag

    $26.73

    Pourable and Pumpable Pre-Extended Self-Consolidating Repair Mortar

    MasterEmaco S 440 Repair Mortar is a one component, shrinkage-compensated micro concrete. It is designed for large volume repairs, including structural elements, typically in applications from 1.5" to full depth.

    (Formerly LA40 Repair Mortar)

    Learn More
  5. BASF Master Builders MasterFlow 885 55 lb bag

    BASF MasterFlow 885 55 lb bag

    $43.94

    High-precision, non-shrink metallic aggregate grout with extended working time

    MasterFlow 885 is a cement-based metallic aggregate grout with extended working time. It is ideally suited for grouting machines or plates requiring optimum toughness and precision loadbearing support, including machine bases subject to thermal movement.

    (Formerly known as Embeco 885)

    Learn More
  6. BASF Master Builders MasterEmaco S 466 CI

    BASF MasterEmaco S 466 CI

    $32.47

    Flowable Structural-Repair Concrete with Corrosion Inhibitor

    MasterEmaco S 466CI is a flowable, shrinkage-compensated repair concrete. It is designed for large volume repairs, including structural elements in applications from 1" to full depth. It has a unique formulation that provides excellent bond, resistance to sulfates and chlorides, high electrical resistivity, low permeability, high-compressive strengths, and protection from corrosion

    (Formerly Emaco S66 CI)

    Learn More
  7. BASF Master Builders MasterEmaco T 430 55 lb bag

    BASF MasterEmaco T 430 55 lb bag

    $31.14

    Rapid-Strength Repair Mortar with Extended Working Time

    A 1-component rapid strength mortar with extended working time for hot weather conditions. Vertical and overhead applications require forming. Wet cure for one day and then apply a curing compound. Will accept an epoxy coating within 6 hrs. High early strength, 1,000 psi in 3 hrs.

    (Formerly Emaco T-430)

    Learn More
  8. BASF Master Builders MasterTop 110 SL 50 lb bag

    BASF MasterTop 110 SL 50 lb bag

    $30.73

    Self-Leveling Cementitious Floor Underlayment

    An economical, self-leveling, poured-in-place cementitious, non-structural floor underlayment intended for use over pre-cast and cast-in-place concrete floors. Contains fast-setting Portland cement and fine aggregate.

    Learn More
  9. MasterSeal 590 10 lb can

    BASF MasterSeal 590 10 lb can

    $22.71

    A 1-component hydraulic cement-based, fast-setting, patching mortar that instantly stops running water or moisture seepage through holes or cracks in concrete and masonry walls. Place material within 30-60 seconds after mixing. Will not shrink or oxidize and is suitable for water immersion service when cured. 

    (Formerly Thoro Waterplug)

    Learn More
  10. masteremacot1061small

    BASF MasterEmaco T 1061 50 lb bag

    $23.74

    Rapid-Setting Cement-Based Concrete Repair Mortar with Extended Working Time

    Rapid setting, shrinkage-compensated, cement mortar with extended working time. Advantages: Extended working time. Limitations: Application temperature range 50°F and rising. Coated in as little as 6 hours.

    (Formerly ThoRoc 10-61)

    Learn More
 

Items 1 to 10 of 33 total