03 01 00 Maintenance of Concrete
Advanced corrosion inhibitor treatment for steel reinforced concrete
A water-based organic compound designed to penetrate concrete surfaces and diffuse in vapor or liquid phase to form a protective layer on reinforcing steel, which will inhibit corrosion, even in high concentrations of chlorides.
(Formerly Master Builders Masterseal CP)Learn More
Sprayable, Fiber-Reinforced Structural Repair Mortar with Integral Corrosion Inhibitor
MasterEmaco S 488CI repair mortar is a one-component, shrinkage-compensated, fiber-reinforced product that contains an integral corrosion inhibitor. It can be applied vertically or overhead by low-pressure spraying or hand troweling.
(Formerly Emaco S88 CI)Learn More
Flowable Structural-Repair Concrete with Corrosion Inhibitor
MasterEmaco S 466CI is a flowable, shrinkage-compensated repair concrete. It is designed for large volume repairs, including structural elements in applications from 1" to full depth. It has a unique formulation that provides excellent bond, resistance to sulfates and chlorides, high electrical resistivity, low permeability, high-compressive strengths, and protection from corrosion
(Formerly Emaco S66 CI)Learn More
A water-based epoxy/cementitious bonding agent/rebar coating used for bonding concrete and mortar. Contains corrosion inhibitor, is VOC compliant and can be used as a rebar coating.
(Formerly Master Builder Emaco P24)
* Hazardous Item, Cannot Ship UPSLearn More
Flowable Horizontal Repair Mortar with Integral Corrosion Inhibitor
A 1-component, fast setting, polymer-modified, cement-based mortar with a corrosion inhibitor. For horizontal repairs, square cut edges to a minimum 1/4" depth. It is used for patching or resurfacing distressed horizontal concrete surfaces. It is used for patching or resurfacing distressed horizontal concrete surfaces.
(Formerly Emaco R310 CI)Learn More
Very Rapid-Setting Chemical Action Mortar
A 1-component concrete repair and anchoring material. Use MasterEmaco T545 in temperatures below 85°F. Phipps recommends using Hot Weather with pea gravel for deeper pours to reduce heat gain.
(Formerly Set 45)Learn More
Very Rapid-Setting Chemical Action Mortar - Hot-Weather Version
A 1-component concrete repair and anchoring material. Hot Weather for use in temperatures ranging from 85-100°F. Can be used below 32°F, no curing required. Phipps recommends using Hot Weather with pea gravel for deeper pours to reduce heat gain.
(Formerly Set 45 HW)Learn More
Rapid-Strength Repair Mortar with Extended Working Time
A 1-component rapid strength mortar with extended working time for hot weather conditions. Vertical and overhead applications require forming. Wet cure for one day and then apply a curing compound. Will accept an epoxy coating within 6 hrs. High early strength, 1,000 psi in 3 hrs.
(Formerly Emaco T-430)Learn More