Concrete Repair Materials
-
Ardex ERM Exterior Ramp Mortar 55lb Bag
$45.40Trowel-Grade Horizontal Concrete Repair Mortar
Exterior Ramp Mortar is a trowel-grade, polymer-modified, Portland cement-based structural repair mortar. It is used at depths ranging from 1/4” to 2” neat, and can be extended up to 8” for deeper and full depth repairs of deteriorated exterior and interior concrete above, on or below grade. Ardex ERM has a corrosion inhibitor built-in to protect reinforcing steel, is easy to apply and readily bonds to concrete.
Learn More -
Ardex CD Concrete Dressing Gray - 40 lb bag
$77.43Concrete Resurfacing Material
A surface treatment for re-dressing worn, spalled, indoor or outdoor concrete surfaces to provide a “new concrete” finish. Mixes with water to a smooth slurry consistency for application over concrete surfaces. Hardens quickly, takes foot traffic in 2 hours and can be driven on after 6-8 hours. Not intended for industrial uses or areas with heavy truck traffic.
Learn More -
Ardex SD-M Designer Floor Finish (Micro-Top) - White 10 lb bag
$41.12Self-Drying, Troweable Topping for Finishing or Resurfacing Interior Floors
A self-drying, Portland cement-based, trowelable topping for fast track finishing or resurfacing of interior concrete and certain non-porous surfaces. Use Ardex SD-M to provide a hard, flat, smooth surface for warehouses, utility rooms and light manufacturing.
Learn More -
Ardex K 301 50 lb bag
$70.88Exterior Self-Leveling Concrete Topping
Exterior self-smoothing, leveling and resurfacing compound. Fast setting, designed to smooth and level rough and damaged concrete surfaces in external and internal situations.
Learn More -
SD-M Designer Floor Finish (Micro-Top) - Gray 10 lb bag
$37.49Self-Drying, Troweable Topping for Finishing or Resurfacing Interior Floors
A self-drying, Portland cement-based, trowelable topping for fast track finishing or resurfacing of interior concrete and certain non-porous surfaces. Use Ardex SD-M to provide a hard, flat, smooth surface for warehouses, utility rooms and light manufacturing.
Learn More -
Ardex TWP Tilt Wall Patch
$31.63Wall Patch and Finishing Compound for Vertical Concrete
A trowelable Portland cement-based finishing compound used to fill and smooth interior and exterior vertical concrete surfaces such as tilt-up walls, pre-cast or poured in place concrete panels, and other concrete or masonry surfaces prior to sealing or painting.
Learn More -
Ardex P-71 Primer 1 gallon
$61.59Primer for Ardex K301
Use P 71 primer over absorbent concrete surfaces, P 71 Primer not to be used with other Ardex products.
Learn More -
Ardex CD Concrete Dressing Gray - Fine 20 lb bag
$51.84Concrete Resurfacing Material
Ardex CD Fine is designed to be applied thinner than Ardex CD due to smaller aggregate. A surface treatment for re-dressing worn, spalled, indoor or outdoor concrete surfaces to provide a “new concrete” finish. Mixes with water to a smooth slurry consistency for application over concrete surfaces. Hardens quickly, takes foot traffic in 2 hours and can be driven on after 6-8 hours. Not intended for industrial uses or areas with heavy truck traffic.
Learn More -
Ardex CP Concrete Patch 40 lb bag
$52.71Concrete Patch and Fill
Portland cement-based, fast setting trowelable patch for repairing and filling surface defects in existing concrete. Suitable for interior and exterior concrete surfaces.
Learn More
