(877) 946-6668

Contact Us  About Us  Locations
 

(0 Items)

You have no items in your shopping cart.
Shop By

Currently Shopping by

  1. Manufacturer: Remove This Item BASF

Concrete Repair Materials

Concrete repair products for general purpose concrete repair, Structural concrete, Industrial & manufacturing facilities. These products are specified for a wide range of horizontal, vertical and overhead applications.
 

Items 1 to 10 of 18 total

  1. masteremacon425small

    BASF MasterEmaco N 425 43 lb bag

    $33.13

    Non-Sag Concrete Repair Mortar with Integral Corrosion Inhibitor for Vertical and Overhead

    MasterEmaco N 425 is a trowel-grade, lightweight, polymer-modified, silica fume-enhanced repair mortar with an integral corrosion inhibitor, designed for vertical and overhead concrete repair applications.

    (Formerly Gel Patch)

    Learn More
  2. BASF Master Builders MasterEmaco T 430 55 lb bag

    BASF MasterEmaco T 430 55 lb bag

    $25.82

    Rapid-Strength Repair Mortar with Extended Working Time

    A 1-component rapid strength mortar with extended working time for hot weather conditions. Vertical and overhead applications require forming. Wet cure for one day and then apply a curing compound. Will accept an epoxy coating within 6 hrs. High early strength, 1,000 psi in 3 hrs.

    (Formerly Emaco T-430)

    Learn More
  3. BASF MasterEmaco A 660 quart

    BASF MasterEmaco A 660 quart

    $15.72

    A 1-component, water-based, acrylic polymer emulsion, used as an internal admixture for Portland cement based mortars, stuccos & concrete mixes. Significantly improves tensile & flexural strengths.

    (Formerly Thoro Acryl 60)

    Learn More
  4. masteremacos440small

    BASF MasterEmaco S 440 55 lb bag

    $26.73

    Pourable and Pumpable Pre-Extended Self-Consolidating Repair Mortar

    MasterEmaco S 440 Repair Mortar is a one component, shrinkage-compensated micro concrete. It is designed for large volume repairs, including structural elements, typically in applications from 1.5" to full depth.

    (Formerly LA40 Repair Mortar)

    Learn More
  5. BASF Master Builders MasterEmaco T 545 50 lb bag

    BASF MasterEmaco T 545 50 lb bag

    $42.85

    Very Rapid-Setting Chemical Action Mortar

    A 1-component concrete repair and anchoring material. Use MasterEmaco T545 in temperatures below 85°F. Phipps recommends using Hot Weather with pea gravel for deeper pours to reduce heat gain. 

    (Formerly Set 45)

    Learn More
  6. MasterSeal 590 10 lb can

    BASF MasterSeal 590 10 lb can

    $22.71

    A 1-component hydraulic cement-based, fast-setting, patching mortar that instantly stops running water or moisture seepage through holes or cracks in concrete and masonry walls. Place material within 30-60 seconds after mixing. Will not shrink or oxidize and is suitable for water immersion service when cured. 

    (Formerly Thoro Waterplug)

    Learn More
  7. masteremacot1061small

    BASF MasterEmaco T 1061 50 lb bag

    $20.97

    Rapid-Setting Cement-Based Concrete Repair Mortar with Extended Working Time

    Rapid setting, shrinkage-compensated, cement mortar with extended working time. Advantages: Extended working time. Limitations: Application temperature range 50°F and rising. Coated in as little as 6 hours.

    (Formerly ThoRoc 10-61)

    Learn More
  8. BASF Master Builders MasterEmaco P 124 3.9 gallon unit

    BASF MasterEmaco P 124 2.7 gallon unit

    $130.43

    A water-based epoxy/cementitious bonding agent/rebar coating used for bonding concrete and mortar. Contains corrosion inhibitor, is VOC compliant and can be used as a rebar coating.

    (Formerly Master Builder Emaco P24)

    * Hazardous Item, Cannot Ship UPS

    Learn More
  9. BASF Master Builders MasterEmaco T 1060 50 lb bag

    BASF MasterEmaco T 1060 50 lb bag

    $21.27

    Very Rapid-Setting Concrete Repair Mortar

    Rapid setting one-component cement mortar, minimizes downtime, structure can be opened to vehicular traffic in as little as one hour, coated in as little as 4 hours. 

    (Formerly ThoRoc 10-60)

    Learn More
  10. MasterEmaco A 660 1 gallon

    BASF MasterEmaco A 660 1 gallon

    $34.44

    A 1-component, water-based, acrylic polymer emulsion, used as an internal admixture for Portland cement based mortars, stuccos & concrete mixes. Significantly improves tensile & flexural strengths.

    (Formerly Thoro Acryl 60)

    Learn More
 

Items 1 to 10 of 18 total