Prosoco

Oil and Grease Stain Remover

$24.80 - $69.07
Availability:
In Stock
SKU:
Oil & Grease Remover
Poultice cleaner for pulling stubborn oil and grease stains out of pavers, concrete, stone and other porous surfaces
No mixing, troweling, plastic covering or tape needed
Leaves no residue
Adding to cart… The item has been added

Documentation

The Chas E. Phipps Tech / SDS Documents system is a search service to product information for the Concrete, Finishes, Masonry and Thermal and Moisture Protection Divisions. All documents are in pdf format and have been compiled from manufacturer websites.

TERMS AND DISCLAIMER: ANY MATERIAL ACCESSED, DOWNLOADED OR OTHERWISE OBTAINED THROUGH THIS SYSTEM IS DONE SO AT THE USER’S DISCRETION AND SOLE RISK. THE CHAS E. PHIPPS COMPANY DOES NOT GUARANTEE THE COMPLETENESS, ACCURACY, QUALITY OR CONTENT OF ANY OF THE DOCUMENTS ACCESSED, DOWNLOADED OR OTHERWISE OBTAINED THROUGH THE SYSTEM, WHICH DOCUMENTS MAY BE AMENDED, CORRECTED OR SUPERSEDED FROM TIME-TO-TIME BY THE MANUFACTURER. USERS ARE CAUTIONED TO ALWAYS CONSULT THE ORIGINAL MANUFACTURER DOCUMENTS. USERS AGREE THAT UNDER NO CIRCUMSTANCE SHALL THE CHAS E. PHIPPS COMPANY BE LIABLE IN ANY WAY FOR (1) THE CONTENT OF ANY DOCUMENTS, INCLUDING BUT NOT LIMITED TO ANY ERRORS, OMISSIONS OR CHANGES IN ANY DOCUMENTS, OR (2) ANY LOSS OR DAMAGE OF ANY KIND (INCLUDING BUT NOT LIMITED TO ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, ATTORNEYS’ FEES AND/OR COSTS) ARISING FROM, RELATING TO OR OTHERWISE INCURRED AS A RESULT OF THE USER’S USE OR VIEWING OF SAID DOCUMENTS ACCESSED, DOWNLOADED OR OTHERWISE OBTAINED THROUGH THIS SYSTEM.

Product Description

Oil & Grease Stain Remover is a poultice cleaner for pulling stubborn oil and grease stains out of pavers, concrete, stone and other porous surfaces. After pouring Oil & Grease Stain Remover onto an embedded stain, it spreads out to make an instant poultice – no mixing, troweling, plastic covering or tape needed. As the poultice dries, it pulls the contaminants out of the substrate, capturing them in its highly absorbent blend of batter-thick surfactants, solvents and powders. After a 5–8 hour dwell, simply sweep up the dried poultice and its absorbed contaminants for easy disposal. Not recommended for asphalt surfaces. 

Benefits

  • Works on old, deeply-set stains.
  • Easy to use - No mixing or scrubbing needed.
  • Works on concrete, pavers, block, stone, tile and brick.
  • Leaves no residue.
  • Removes motor oil, brake and power-steering fluids, anti-freeze, hydraulic fluids, cooking oils, food grease and other oil-based stains.
  • Will not discolor stone.
  • Safe on marble, granite, limestone and travertine.
Coverage
1 quart cleans approx. 2-3 sq. ft. | 1 gallon cleans approx. 8-12 sq. ft.
Application Temperature
Best for use at 50°F or above

Related Products