(877) 946-6668

Contact Us  About Us  Locations
 

(0 Items)

You have no items in your shopping cart.

07 90 00 Joint Protection

07 90 00 Joint Protection
 

Items 1 to 10 of 82 total

  1. WR Meadows Safe-Seal 3405 1 gallon

    WR Meadows Safe-Seal 3405 1 gallon

    $21.90

    A high performance, polymer modified asphalt emulsion horizontal joint and crack sealant. A one-component, self-leveling material that can easily be poured into openings from 1/8" to 1" wide. Becomes tack free in two hours, will remain flexible at cold temperatures and will not flow at high temperatures.

    Learn More
  2. 3405hotappliedpolymericsealantsmall

    WR Meadows 3405 Hot Applied Polymeric Sealant - ODOT State Tested 55 lb carton

    $67.11
    A high performance, polymer modified asphalt emulsion horizontal joint and crack sealant. A one-component, self-leveling material that can easily be poured into openings from 1/8 to 1 inch wide. Becomes tack free in two hours, will remain flexible at cold temperatures and will not flow at high temperatures. Learn More
  3. Vulkem Primer #171 quart

    Vulkem Primer #171 quart

    $25.95

    A primer for Tremco urethane sealants on porous substrates such as concrete or wood. Use with urethane sealants, deck coatings and TREMproof membranes. Coverage rate: 100-600 sf/gal.

    * Hazardous Item, Cannot Ship UPS

    Learn More
  4. Tremco Vulkem Primer #171 1 gallon

    Tremco Vulkem Primer #171 1 gallon

    $61.33

    A primer for Tremco urethane sealants on porous substrates such as concrete or wood. Use with urethane sealants, deck coatings and TREMproof membranes. Coverage rate: 100-600 sf/gal.

    * Hazardous Item, Cannot Ship UPS

    Learn More
  5. WR Meadows Safe-Seal 3405 5 gallon

    WR Meadows Safe-Seal 3405 5 gallon

    $105.47

    A high performance, polymer modified asphalt emulsion horizontal joint and crack sealant. A one-component, self-leveling material that can easily be poured into openings from 1/8" to 1" wide. Becomes tack free in two hours, will remain flexible at cold temperatures and will not flow at high temperatures.

    Learn More
  6. sofsealsmall

    WR Meadows Sof-Seal 3 gallon unit

    $136.61

    Cold Applied, Low-Modulus Horizontal Joint Sealant

    A 2-component, cold-applied, pourable horizontal joint sealant. Use on Portland cement and asphaltic concrete. Provides a cost effective alternative to hot-applied sealants, avoid use in areas subjected to mass pedestrian traffic, minimum application temperature of 40°F.

    Learn More
  7. WR Meadows Sealex EZ 1 gallon

    WR Meadows Sealex EZ 1 gallon

    $33.12

    One-Part, Flexible, Cold-Applied, Traffic Loop Sealant

    A one part, flexible and fast drying traffic loop protector sealant. Encapsulates sensitive detection wiring adding greater protection and providing superior joint sealing properties. Can be applied to damp joints and bonds to concrete and asphalt.

    Learn More
  8. Metzger/McGuire MM-80 1 gallon unit

    Metzger/McGuire MM-80 1 gallon unit

    $76.25

    A 2-part liquid, 100% solids epoxy resin of concrete gray color. Developed for use as a joint filler in industrial concrete floors subjected to hard-wheeled vehicles. It prevents joint edges from breaking off ("spalling") as wheels make contact. Can also be used to fill spalled or undamaged cracks in floors and for repairing spalled joints. Minimum concrete cure time of 60-90 days before application, if installed sooner, slight separation from joint edges may occur due to shrinkage, can be addressed with Crack-Fill 4. 

    Learn More
  9. Euco QWIKjoint 200 22 oz cartridge

    Euco QWIKjoint 200 22 oz cartridge

    $36.90

    A fast-setting, semi-rigid polyurea used for filling control and construction joints in industrial concrete floors. Super-fast set time and an extended shave time, can be trimmed flush with the floor minutes after placement or up to 24 hours later. Supports and protects joint edges, reducing spalling of the joint edges. 

    Learn More
  10. 3405hotappliedpolymericsealantsmall

    WR Meadows 3405 Hot Applied Polymeric Sealant 55 lb carton

    $59.01
    A hot-applied, single component polymeric compound. Specifically formulated for cost effective sealing of cracks and joints in Portland cement and asphaltic concrete highways. Advantages: Exceeds the physical property requirements of 20% crumb rubber filler. Limitations: Minimum application temperature of 40°F; crack configuration is a 2-to-1 ratio of 1/2" min. width. Technical Data: Viscosity 380°F: 2,000 cps. Pouring Temperature: 370°F. Safe Heating Temperature: 390°F. Application Life 370°F: 12-15 hrs. Learn More
 

Items 1 to 10 of 82 total