Mapei

Mapefer 1K, Corrosion-Inhibiting Coating for Reinforcing Steel, 10lb bag

$34.24
SKU:
4011545
MNP:
2766105
One-component, anti-corrosion coating based on unique polymers, cementitious binders and corrosion inhibitors.
Specially formulated for application on properly prepared reinforcing steel to inhibit oxidation and rust formation.

Call for Availability

Product Description

Features and Benefits

  • High in density and alkalinity, Mapefer 1K offers excellent resistance to chloride penetration, carbon dioxide penetration and pollutants.
  • Meets or exceeds the performance of alternate three-component anticorrosion products, when tested at ASTM B117 standards
  • Excellent workability with long pot life and extended open time
  • Allows application of repair mortars for up to 14 days after application of Mapefer 1K
  • When brushed or oversprayed on concrete and masonry surfaces,Mapefer 1K will not act as a bond breaker.

Product Application

Read all installation instructions thoroughly before installation.
Application on steel as an anticorrosion coating

1. Apply by brush within one hour (at 73°F) of mixing.
2. Apply in two coats of 1/32" each, totaling 2/32".
3. Apply the second coat between 2 and 24 hours of the first coat.
4. Do not apply repair mortar until Mapefer 1K is completely dry, usually after 6 hours at 73°F.

Water Mix Ratio
1 to 1.2 US Quarts
Pot Life
> 1 hour
Minimum Waiting Time Between Coats
About 2 Hours
Minimum Time Before Application of Repair Mortar
6 to 24 Hours
Coverage Rate (on flat surface)
About 15 to 18 ft²

Related Products