SikaGrout 212 50lb Bag

$14.84
pourable
Pumpable
Availability:
In Stock
SKU:
0405010
MNP:
90824
General Purpose Cementitious Grout
Use for filling cavities, voids, gaps, machine and column base plates
Coverage: 0.44 ft³

Documentation

The Chas E. Phipps Tech / SDS Documents system is a search service to product information for the Concrete, Finishes, Masonry and Thermal and Moisture Protection Divisions. All documents are in pdf format and have been compiled from manufacturer websites.

TERMS AND DISCLAIMER: ANY MATERIAL ACCESSED, DOWNLOADED OR OTHERWISE OBTAINED THROUGH THIS SYSTEM IS DONE SO AT THE USER’S DISCRETION AND SOLE RISK. THE CHAS E. PHIPPS COMPANY DOES NOT GUARANTEE THE COMPLETENESS, ACCURACY, QUALITY OR CONTENT OF ANY OF THE DOCUMENTS ACCESSED, DOWNLOADED OR OTHERWISE OBTAINED THROUGH THE SYSTEM, WHICH DOCUMENTS MAY BE AMENDED, CORRECTED OR SUPERSEDED FROM TIME-TO-TIME BY THE MANUFACTURER. USERS ARE CAUTIONED TO ALWAYS CONSULT THE ORIGINAL MANUFACTURER DOCUMENTS. USERS AGREE THAT UNDER NO CIRCUMSTANCE SHALL THE CHAS E. PHIPPS COMPANY BE LIABLE IN ANY WAY FOR (1) THE CONTENT OF ANY DOCUMENTS, INCLUDING BUT NOT LIMITED TO ANY ERRORS, OMISSIONS OR CHANGES IN ANY DOCUMENTS, OR (2) ANY LOSS OR DAMAGE OF ANY KIND (INCLUDING BUT NOT LIMITED TO ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, ATTORNEYS’ FEES AND/OR COSTS) ARISING FROM, RELATING TO OR OTHERWISE INCURRED AS A RESULT OF THE USER’S USE OR VIEWING OF SAID DOCUMENTS ACCESSED, DOWNLOADED OR OTHERWISE OBTAINED THROUGH THIS SYSTEM.

Product Description

Non-shrink cementitious grout, compensates for shrinkage in both plastic & hardened states. USDA approved, & ASTM C-1107. Minimum application temperature of 45°F and rising during application.

 Applications:

  • General purpose grouting
  • Machine and column base plates
  • Anchor rods, bearing plates
  • Ram in place as a dry pack
  • Trowel-apply as a medium flow
  • Pour or pump as high flow
  • Bedding joints in pre-cast concrete sections
  • Filling cavities, voids, gaps and recesses
  • On grade, above and below grade
  • Indoors and out
Yield
0.44 ft³
Application Thickness
1/2"-4"
Compressive Strength
1-day, 4,500psi (plastic) 28-day, 7,500psi (plastic)
Set Time
Initial 3.5-4.5hr (plastic), 4.5-6.5hr (fluid) - Final 4.5-5.5hr (plastic), 6-8hr (fluid)

Video

Related Products

Customers Also Viewed