Euclid Chemical

Vandex Super Gray 50lb bag

$64.31
SKU:
7851000
MNP:
V001P 50
NSF/ANSI 61 Approved Crystalline Waterproofing
Once applied, crystal growth occurs, blocking the capillaries and minor shrinkage cracks within the concrete to prevent any further water ingress.
Can be applied to “green” concrete structures

Call for Availability

Product Description

Vandex Super is a waterproof treatment that become an integral part of concrete through a crystallization process. Once the cementitious carrier is applied to either the positive or negative side of the substrate, crystal growth occurs, blocking the capillaries and minor shrinkage cracks within the concrete to prevent any further water ingress. In addition to waterproofing, Vandex Super protects concrete substrates against saltwater, wastewater, harsh ground water and certain chemical solutions.

Applications:

  • Sewage & water treatment plants
  • Swimming pools
  • Foundations & basements
  • Secondary containment tanks
  • Dams & water reservoirs
  • Manholes
  • Tunnels & subways
  • Construction joints
  • Spillways
  • Structural slabs
  • Underground vaults
  • Retaining walls

Features:

  • Positive or negative side to minimize excavation
  • Allows vapor to pass through substrate
  • Remains permanently active within concrete
  • Resistant to hydrostatic pressure
  • Provides resistance against chemical exposure
  • No membrane to tear or puncture
  • Monolithic, no seams to separate
  • Can be applied to “green” concrete structures
  • No special surface preparation or primers needed
  • NSF approved for potable water use

Coverages Rates

  • Positive and negative side wall waterproofing: 320 ft²/bag per coat (approximately 5 to 7 wet mils). Two coats are
    required. (160 ft² of wall area can be completed with one bag of product).
  • Water retaining structures: 320 ft²/bag per coat (approximately 5 to 7 wet mils). Two coats are required. (160 ft²
    of wall area can be completed with one bag of product).
  • Freshly placed concrete slabs (including split slabs): 205 ft²/bag
  • Construction joints: 160 ft²/bag (approximately 10 to 14 wet mils). Only one coat is required.

Documentation

Contact us for Data and Safety Data Sheet documentation

Related Products