Ardex

V1200 Self-Leveling Underlayment

$46.95
Availability:
In Stock
SKU:
0110270
MNP:
12515
Self-Leveling Underlayment
Blend of Portland cements, other hydraulic cements and polymers that is used to level and smooth interior concrete and other surfaces prior to the installation of finished flooring - on, above or below grade
Install most floor coverings after 24 hours
Adding to cart… The item has been added

Documentation

The Chas E. Phipps Tech / SDS Documents system is a search service to product information for the Concrete, Finishes, Masonry and Thermal and Moisture Protection Divisions. All documents are in pdf format and have been compiled from manufacturer websites.

TERMS AND DISCLAIMER: ANY MATERIAL ACCESSED, DOWNLOADED OR OTHERWISE OBTAINED THROUGH THIS SYSTEM IS DONE SO AT THE USER’S DISCRETION AND SOLE RISK. THE CHAS E. PHIPPS COMPANY DOES NOT GUARANTEE THE COMPLETENESS, ACCURACY, QUALITY OR CONTENT OF ANY OF THE DOCUMENTS ACCESSED, DOWNLOADED OR OTHERWISE OBTAINED THROUGH THE SYSTEM, WHICH DOCUMENTS MAY BE AMENDED, CORRECTED OR SUPERSEDED FROM TIME-TO-TIME BY THE MANUFACTURER. USERS ARE CAUTIONED TO ALWAYS CONSULT THE ORIGINAL MANUFACTURER DOCUMENTS. USERS AGREE THAT UNDER NO CIRCUMSTANCE SHALL THE CHAS E. PHIPPS COMPANY BE LIABLE IN ANY WAY FOR (1) THE CONTENT OF ANY DOCUMENTS, INCLUDING BUT NOT LIMITED TO ANY ERRORS, OMISSIONS OR CHANGES IN ANY DOCUMENTS, OR (2) ANY LOSS OR DAMAGE OF ANY KIND (INCLUDING BUT NOT LIMITED TO ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, ATTORNEYS’ FEES AND/OR COSTS) ARISING FROM, RELATING TO OR OTHERWISE INCURRED AS A RESULT OF THE USER’S USE OR VIEWING OF SAID DOCUMENTS ACCESSED, DOWNLOADED OR OTHERWISE OBTAINED THROUGH THIS SYSTEM.

Product Description

Benefits

  • Use to level and smooth interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems and non-water soluble adhesive residue on concrete
  • A blend of Portland cement and other hydraulic cements
  • Installs up to 1 1/4″ neat
  • Can be tapered to meet existing elevations
  • Walkable in 2-3 hours
  • Install moisture-insensitive tile and stone after 6 hours, most other floor coverings after 24 hours (see Installation of Flooring section in Technical Data for details)
  • Interior use only

Installation

Coverage: 25 sq. ft. per bag at 1/4”
Coverage will vary depending on the texture of the surface being smoothed.

Performance

Initial Set (ASTM C191): Approx. 30 minutes
Final Set (ASTM C191): Approx. 90 minutes
Compressive Strength (ASTM C109/mod – Air cure only): 4,500 psi at 28 days
Flexural Strength (ASTM C348): 1,000 psi at 28 days

 
Minimum Thickness
1/8"
Maximum Thickness
1 1/4"
Walkable
2-3 Hours
Mixing Ratio
5 quarts of water per 50 lb. bag
Flow Time
10 Minutes

Related Products