Documentation
The Chas E. Phipps Tech / SDS Documents system is a search service to product information for the Concrete, Finishes, Masonry and Thermal and Moisture Protection Divisions. All documents are in pdf format and have been compiled from manufacturer websites.
TERMS AND DISCLAIMER: ANY MATERIAL ACCESSED, DOWNLOADED OR OTHERWISE OBTAINED THROUGH THIS SYSTEM IS DONE SO AT THE USER’S DISCRETION AND SOLE RISK. THE CHAS E. PHIPPS COMPANY DOES NOT GUARANTEE THE COMPLETENESS, ACCURACY, QUALITY OR CONTENT OF ANY OF THE DOCUMENTS ACCESSED, DOWNLOADED OR OTHERWISE OBTAINED THROUGH THE SYSTEM, WHICH DOCUMENTS MAY BE AMENDED, CORRECTED OR SUPERSEDED FROM TIME-TO-TIME BY THE MANUFACTURER. USERS ARE CAUTIONED TO ALWAYS CONSULT THE ORIGINAL MANUFACTURER DOCUMENTS. USERS AGREE THAT UNDER NO CIRCUMSTANCE SHALL THE CHAS E. PHIPPS COMPANY BE LIABLE IN ANY WAY FOR (1) THE CONTENT OF ANY DOCUMENTS, INCLUDING BUT NOT LIMITED TO ANY ERRORS, OMISSIONS OR CHANGES IN ANY DOCUMENTS, OR (2) ANY LOSS OR DAMAGE OF ANY KIND (INCLUDING BUT NOT LIMITED TO ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, ATTORNEYS’ FEES AND/OR COSTS) ARISING FROM, RELATING TO OR OTHERWISE INCURRED AS A RESULT OF THE USER’S USE OR VIEWING OF SAID DOCUMENTS ACCESSED, DOWNLOADED OR OTHERWISE OBTAINED THROUGH THIS SYSTEM.Product Description
SikaQuick®-2500 is a one-part, cementitious, very rapid hardening, early strength gain, cementitious, patching mortar for concrete.
Uses
- On grade, above grade and below grade concrete conditions
- Highway overlays and repairs
- Structural repair material for concrete roadways, parking structures, bridges, dams and ramps
- Full depth patching repairs(may require multiple lifts)
- Economical patching material for horizontal flatwork repairs of mortar lines and conrete surfaces
Characteristics / Advantages
- Very rapid hardening as defined by ASTM C 928
- Open to foot traffic in 45 minutes / Open to vehicular
traffic in 1 hour at 73°F - Use in cold temperatures with SikaQuick Winter Boost
[at ambient and substrate temperatures of 20°F - 45°F
Working Time
~15 minutes
Vehicular Traffic Ready
1 hours
Thickness
Apply 1/4" to 1" neat, up to 6" with aggregate
Mixing
One component, mix with water
Temperature
Use in 20°F - 45°F temps with SikaQuick Winter Boost
Yield
0.43 ft³; 0.58 ft³ when extended 50%
Coverage
Approximately 10.33 ft² @ 1/2" thick per bag; Calculator
28 day compressive strength
8500 psi
Weight
50 lbs